YBLN rapid separation hydraulic and pneumatic supercharging cylinder product features and characteristics
Actuator: double
Actuator pressure: 3-7kg/cm2 clean compressed air
Anti-wear hydraulic oil VG: 68 # anti-wear hydraulic oil
Working temperature: 0-55 deg c
Operating speed: 200-500mm/s
Cylinder compression/cm2 300kg:
Cylinder pressure 12kg/cm2.
Pressure tolerance: + 100 mm 0.00 mm
Power trip tolerance: + 0.20 mm 0.00 mm
Working frequency: 25-65 times per minute (specific and preloading and vasopressor stroke)
High-pressure output: 1-100 tonnes (actual output can be customized according to customer's need tonnage),

This cylinder advantages for fast movement (50-100 standard fast after-sales maintenance and use, low cost (the hydraulic oil cylinder without prior supplies after normal consumption by special supplement cup automatic injection), but the shortcomings in the longitudinal length for installation and is hard to control the cylinder, and can only be being installed (i.e. from up to down, do not install); inversion and arbitrary Angle And in the longitudinal length respect tallish, Only on the longitudinal length without universal programmable.to limit. Large Because of the large, so the VAT applies to the product shape, bearing etc hardware assemble and squeezed frequency required shape etc. The airport fast