|
 |
|
 |
|
|
|
| |
Contact:Mr.Deng 18929104529 Mr.Zhou 18929169595
Miss Zhang 18929104530
Toll Free: 4000661106
Tel: 076921664818 (16 lines)
Fax: 076921664685
E-mail: ybl_kj@163.com
Website: http://www.dgybl.com
Address: Dongguan City Wanjiang Dafen Industrial Zone sand Kiln Lane 31, Lane ten |
|
|
|
|
|
|
![]() |
| YBLX four-post type pneumatic press structure characteristics | YBLX four-post type pneumatic press structure characteristics
1 and structure
Following pneumatic hydraulic equipment technology Co., LTD. Is the production of four pillars of mainframe and control of mechanical machine consisting of two. Through the pipe and electrical devices connected to form a complete one, the main part of the cylinder body, two parts. Control agencies including the power structure, process equipment, pipeline and the electrical box, etc. Now all parts of structure and function are as follows:
(1) the fuselage
From the fuselage beams and columns, slider, workbench, lock nut and conditioning nut, rely on four pillar for the skeleton, beams, workbench by lock nut is fixed to the ends of the whole machine, a. By adjusting the precision machine to adjust the nut, slider equipped with four in the direction of resistant materials, guide by hex bolt fastening sets up the slider to end. And there were dustproof wool dust. On the face of the slider and cylinder piston rod on the flange connection, four pillar for guidance movement up and down on the surface, in work and slider under the surface with t-shape slot to install mould.
2 main cylinder
The cylinder structure for piston cylinder block and orientation of the piston, piston rod of head, locking, and connecting flange, crock mouth flange. The cylinder and big crock mouth sets on shoulder locking action on beams in the hole, piston down by connecting flange face with slide block. The head of the piston rod, installed in the lock nut tightening, equipped with two groups in the piston head of the opposite direction, will YA type sealing oil cylinder is divided into two oil chamber, and pressing, return action. Installed in the cylinder bushing crock mouth lower bushing, crock mouth the hole is equipped with YA type ring, outside the circle with o-type ring, crock mouth screw fastening flange, hex in oil cylinder on the surface to ensure the sealing crock mouth sealing. |
| | 【 Views：817 】 【 add time：2010-6-19 10:02:25 】 【 close 】 |
|
|
Liquid pressure cylinde- r series.jpg){kind=small}