|
 |
|
 |
|
|
|
| |
Contact:Mr.Deng 18929104529 Mr.Zhou 18929169595
Miss Zhang 18929104530
Toll Free: 4000661106
Tel: 076921664818 (16 lines)
Fax: 076921664685
E-mail: ybl_kj@163.com
Website: http://www.dgybl.com
Address: Dongguan City Wanjiang Dafen Industrial Zone sand Kiln Lane 31, Lane ten |
|
|
|
|
|
|
![]() |
| Have the following requirements of the press should choose stamping | Large and small hybrid processing, mould exchange of high frequency, JIT request for easy set-up, general press can finish a few seconds.
Feeding method: feeding method is artificial feeding instead of depending on the initiative, small batch production batch processing of less than 10 million pieces per year), artificial feeding, But mass production is active part or all of the application materials. Eccentric loading is the need of eccentric pressure, should choose double column press.
Top institution: the material or active material to application of hydraulic cushion, should choose hydraulic slider and pressure, to control when requesting higher request to the different processing speed or control the slider, position precision request status of high pressure and request for a long time, should choose hydraulic press.
Installation flexibility: when another project to apply the hydraulic press, need to install. Such as line, for stroke in any change can be applied to the stage, the maximum pressure machine easily.
Deep drawing: because the hydraulic slider can accurately control speed, so in metal material flow, and won't allow torn, so deep drawing is application of hydraulic press. Hydraulic element in practical production process: low, mould exchange frequently, drawing speed, needs a variety of hydraulic pressure changes, the high pressure regulating request deep drawing.
The following case of deep drawing suggest application hydraulic press. The complex, request Settings, because the workpiece brief design, the processing procedures for complex is more complex, and hydraulic adjustment in brief, the practical. Pressure machine structure, when requesting a single machine processing or have more complete drawing plastic process step, hydraulic press.
In deep drawing is practical hydraulic tensile or the single/production schedule, with pressure, make proper limits on finishing forming. With the pressure in the process of drawing for hydraulic pressure, can maintain the highest that can reduce press tonnage request.
This article reprinted http://www.dgybl.com from (the), |
| | 【 Views：822 】 【 add time：2010-8-7 11:54:35 】 【 close 】 |
|
|
Liquid pressure cylinde- r series.jpg){kind=small}