|
 |
|
 |
|
|
|
| |
Contact:Mr.Deng 18929104529 Mr.Zhou 18929169595
Miss Zhang 18929104530
Toll Free: 4000661106
Tel: 076921664818 (16 lines)
Fax: 076921664685
E-mail: ybl_kj@163.com
Website: http://www.dgybl.com
Address: Dongguan City Wanjiang Dafen Industrial Zone sand Kiln Lane 31, Lane ten |
|
|
|
|
|
|
![]() |
| Pressure Valve action principle and applications | Pressurization valve features:
Pressurization valve is a kind of low-pressure hydraulic transmission system will be transformed into high proportion of oil, oil pressurization valve hydraulic transmission fields. It is by the body, the supercharger and DongHuan fluid to the valve, etc. Through the body, into the hole, control oil and oil discharge valve, will DongHuan fluid to the valve supercharger and organic unifies in together. The pressurization valve is the significant characteristic of pump pressure prompted by the source to the valve with liquid DongHuan supercharger mutual position, determine the corresponding eliminates linkage transmission movement and rotary motion, thus make the valve to concise and practical, according to this principle can be formed a kind of automatic reciprocating cylinder, is advantageous to hydraulic transmission to the simplified, saving energy and reducing consumption direction.
Pressurization valve movement principle:
Pressurization valve assembly direct replacement parts of its role in and engine torque is proportional to the hydraulic torque signal under the condition of strong load to increase oil pressure. Input pressure points along with two way: pressurization room A and B, Another way, the driver drive room B vitamin room air exhaust. Big piston moves left, pressure chamber pressurization B small pistons went round, reversing valve switch, driving room, A driver room B exhaust air intake, piston retrorse motion, pressure chamber A booster.
Pressurization valve applications:
Gas path or individual needs to be used.
The space is narrow, large diameter cylinder diamethe cylinder configuration, but also must ensure that the output force.
Gas control type, must be in remote to compensate for the loss of pressure booster.
To shorten the air to air tank to certain pressure of time.
Chi road users device requirements of different high output force.
This article reprinted http://www.dgybl.com from (the), |
| | 【 Views：799 】 【 add time：2010-9-3 8:38:30 】 【 close 】 |
|
|
Liquid pressure cylinde- r series.jpg){kind=small}